SWP-0412/0420G Series L2 Managed Switch User’s Guide
66
5.3.3 Bridge
Commands
5.3.3.1 Trunk
[Show Trunk]
Displays a specific trunk group settings. User can create a new trunk group by
specify a unique trunk ID, a trunk name description, the port selection criterion
(rtag) and its trunk group member ports.
CLI command :
l2 trunk show
<trunk id>
[rtag]
Set traffic distribution algorithm (1~3). The “rtag” is the packet distribution
algorithm for the trunk group.
CLI command :
l2 trunk rtag
<1|2|3>
Rtag values and corresponding meanings:
1: source XOR destination MAC(L2),
2: source XOR destination IP(L3)
3. source XOR destination Port(L4).
[Create Trunk]
Creates a new trunk group by giving trunk ID, rtag, name and port numbers.
The “rtag” is the packet distribution algorithm for the trunk group.
CLI command :
l2 trunk create <trunk id> <trunk name> <port list>
[Add/Remove Trunk]
Trunk group port members can be added to or removed from an existing trunk
group.
CLI command :
l2 trunk add
<trunk id> <port list>
CLI command :
l2 trunk remove
<trunk id> <port list>
Summary of Contents for SWP-0412G
