SWP-0412/0420G Series L2 Managed Switch User’s Guide
42
4.5.5 Static
Addresses
You can add a MAC address into the switch address table. The MAC address
added by this way will not age out from the address table. We call it static
address.
MAC Address: enter the MAC address
VLAN ID: enter the VLAN ID that the MAC belongs
Port Selection: select the port which the MAC belongs
Discard: you can do packet filtering when the MAC address appears in
the packets as destination address, source address, or either of them.
Click on the
when you create a new static MAC address by the
above information. Then you will see the new added entry shows in the
address window. You can remove the existed address by selecting the entry
with the mouse, then clicking on
. The
button updates the
existed MAC address entries. Click
to save effective. Click
to
refresh the settings to current value. To make the configuration effective,
please go to “save configuration” page, then click
.
Figure 21. Static Address
Summary of Contents for SWP-0412G
