SWP-0412/0420G Series L2 Managed Switch User Guide
[Upload]
No CLI command for this function. Refer to Boot ROM commands for this
function.
5.3.2
Physical Interface Commands
[Admin]
[Enable/Disable]
Displays the port admin status, allow user to turn the port on or off.
CLI command :
l2 port admin
<port number> <enable/disable>
[Mode]
[Auto/10M-Half/10M-Full/100M-Half/100M-Full/1G-Full]
Displays the current speed and duplex mode of the port. The speed and
duplex mode can be automatically detected when auto-negotiation is enabled
on a port.
CLI command :
l2 port autoneg
<port number> <enable/disable>
CLI command :
l2 port speed
<port number> <10/100/1000>
CLI command :
l2 port duplex
<port number> <full/half>
[Flow Control]
[
Enable/Disable
]
Displays the IEEE802.3x flow control setting of a port. Note that this flow
control is operating only in full duplex mode.
CLI command :
l2 port flow
<port number> <enable/disable>
[Reload]
Restores the previous port settings from the configuration file.
CLI command :
l2 port retrieve
Summary of Contents for SWP-0412G
