SWP-0412/0420G Series L2 Managed Switch User Guide
•
Multi-host: If enabled, ALL hosts connected to the selected port are
allowed to use the port if ONE of the hosts passed the authentication. If
disabled, only ONE host among other hosts passed the authentication is
allowed to use the port.
•
Authentication Control: If 'force_authorized' is selected, the selected port is
forced authorized. Thus, traffic from all hosts is allowed to pass. Otherwise,
if 'force_unauthorized' is selected, the selected port is blocked and no
traffic can go through. If 'Auto' is selected, the behavior of the selected port
is controlled by 802.1x protocol. All ports should be set to 'Auto' under
normal conditions.
Click
to make the settings permanent. Click
to refresh
the settings to current value.
Figure 28. Port Access Control
4.7.2 Dial-In
User
Dial-in User is used to define users in the local database of the switch.
•
User Name: New user name.
•
Password: Password for the new user.
•
Confirm Password: Enter the password again.
Summary of Contents for SWP-0412G
