Planex SWP-0224FP, User Manual, Page: 79 / 124

SWP-0224FP 24PORT L2 INTELLIGENT PoE SWITCH User’s Manual
79
Table 6. Boot ROM commands
Command Parameters Usage Notes
a NONE Show MAC address
b 1 or 2 or a Dual image support. You
can choose the firmware to
execute by giving a slot ID,
or use “a” for auto select.
Auto-select will execute the
most updated firmware.
This is the default setting. When you fail in
firmware update, you
can use this command to
boot up the switch using
the old firmware.
Change it back to
auto-select mode after
successfully updating
the firmware.
c IP address and
mask / None Configure/ display TFTP
client IP address
g NONE Load and execute firmware
h NONE Display online help
p NONE Display current
configuration
r NONE System reboot
s IP address Configure/ display TFTP
server IP address
t NONE Toggle safe mode When a configuration file
is corrupt or you forget
your password, use safe
mode to enter CLI mode.
Your configuration file is
lost in this mode. You
need to restore your
configuration, or
re-configure the system
u File name Upload boot
module/firmware via
network using TFTP
protocol
v NONE Display boot rom version
w NONE Toggle administrator
password reset Reset user ID and
password once to
default value. Your
configuration settings
will not be changed.