Planex SWP-0224FP, User Manual, Page: 18 / 124

SWP-0224FP 24PORT L2 INTELLIGENT PoE SWITCH User’s Manual
18
Table 4. LED Indicators
No. LED Description
1 System Solid green indicates that the device is turned
on. If this light is off, check if the power
adapter if attached to the switch and plugged
into a power source.
2 Fan Solid green indicates that all fans work
properly
3 PoE Solid green indicates that PoE module is
connected.
4 Switch ports
[1] to [26]
Solid green indicates that the device can
communicate with the LAN, or flashing when
the device is sending or receiving data from
your LAN computer.
5 PoE ports
[1] to [24]
Solid green indicates that PD is connected, or
flashing when PD is off due to a fault on the
port
3.3 Part 3 — Basic switch setting for
management
After completing the hardware connections, configure the basic settings for
your switch. You can manage the switch using the following methods:
•
Web interface: the switch has a set of pages to allow to you manage it
using Java
®
-enabled IE5.5 or higher version.
•
Command Line Interface: use console port to manage the switch.
3.3.1 Setting up through the console port
1. Use the supplied crossover RS-232 cable to connect to the console
port on the back of the switch. This port is a male DB-9 connector,
implemented as data terminal equipment (DTE) connection. Tighten
the retaining screws on the cable to secure it on the connector.
Connect the other end of the cable to a PC running terminal emulation
software, e.g. Hyper Terminal.