Planex FW-100TX, User Manual

Page: 34 / 52

57
FW-100TX
56
FW-100TX
6. Click on the "OK" button.
7. Click on the "Close" button. You will be asked to restart the computer.
Click on the "Yes" button to restart your computer.
Follow the procedure below to delete the FW-100TX driver:
1. Open "My Computer" and "Control Panel".
2. Double click on the "Network" icon.
3. In the "Network" window, click on the "Adapter" tab.
5 4
Deleting the Driver
The initial setting of the communication rate of the FW-100TX Adapter is
configured by Auto-Negotiation (AutoSense). Auto-Negotiation
automatically sets the appropriate communication rate and mode. To change
these settings, follow the procedure below:
1. Double click on the "My Computer" icon and then double click on the
"Control Panel" icon.
2. Double click on the "Network" icon.
3. Click on the "Adapter" tab.
4. Select "FW-100TX Fast Ethernet Adapter" and click on the "Properties"
button.
5. Specify the Duplex mode. You can choose one of the following settings.
Auto Sense:
The communication rate (100Base-TX/10Base-T) and the communication
mode (full-duplex/half-duplex) are automatically set by the Auto-
Negotiation function.
100BASETX:
The communication rate will be fixed to 100BASE-TX/half-duplex.
100BASETX Full_Duplex:
The communication rate will be fixed to 100BASE-TX/full-duplex.
10BASET (Twisted_Pair):
The communication rate will be fixed to 10BASE-T/half-duplex.
10BASET Full Duplex:
The communication rate will be fixed to 10BASE-T/full-duplex.
5 3
Setting the Communication Rate