Planex FW-100TX, User Manual

Page: 28 / 52

45
FW-100TX
44
FW-100TX
18. The next screen allows you to change Binding settings. Click on the
"Next" button.
19. A message reading "The network is ready to start." appears. Click on
the "Next" button.
16. You will be asked whether you intend to use a DHCP server. Contact
your network administrator and check whether you need to use this
server. If you do, click on "Yes". If not, click on "No".
17. If you have selected not to use a DHCP server, you will be asked to
enter an IP address. Enter the IP address, sub net mask, gateway
address and other required values for your computer. Consult with your
network administrator and if required, set the DNS or WINS addresses.
After the parameters have been set, click on the "OK" button.