Planex FNW-9802-T User Manual Download

Page: 9 / 51

The supplied driver diskette contains the following directories. In order to

install each driver, please see the respective explanation file included in the

diskette.

NETWARE

\ DOSODI

NetWare ODIDOS client driver

\ 3.12

NetWare 3.12 sever driver

\ 4.10

NetWare 4.1x server driver

WIN95

Driver description file for Windows95

WIN98

Driver description file for Windows98

WINNT

WindowsNT 3.51/4.0 driver

WIN2000

Windows2000 Driver and its description file

NDIS2

NDIS 2.0 DOS driver

MSLANMAN.DOS

LAN MANAGER DOS driver

WFW311

Windows for Workgroups 3.11 driver

PKTDRV

Packet driver

DIAG

Diagnostics utility

FNW-9802-T

Contents of the Driver Diskette

1-2 Wakeup On LAN

The Wakeup On LAN function allows computers to be turned on via

network, and system administrators may benefit from this feature to a great

extent. For instance, the system administrator is no longer required to visit a

remote site and install an application to all of the computers there; after all

the users have left, he/she can simply power on the computers remotely via

a network and do the job to each PC, all from the comfort of his/her own

chair.

Wakeup On LAN is activated as the target PC receives a special packet

called Magic Packet from the system administrator's computer. The target

PC starts up automatically.

To enable Wakeup On LAN, you will need a computer with Wakeup On

LAN support and a software package for transmitting Wakeup On LAN

packets (ex. Intel LAN Desk Client Manager and others) besides the FNW-

9802-T Ethernet Adapter itself.

Please refer to the user's manual of each software package for procedures to

enable Wakeup On LAN.

About Wakeup On LAN

Summary of Contents for FNW-9802-T




















































Search results

Summary of Contents for FNW-9802-T

Reviews:

Related manuals for FNW-9802-T

Brands by name

Popular brands

Planex FNW-9802-T, User Manual

Search results

Summary of Contents for FNW-9802-T

Reviews:

Related manuals for FNW-9802-T

Brands by name

Popular brands