26
FNW-9802-T
25
FNW-9802-T
2. The system asks you whether you really wish to delete the driver. Click
on the "OK" button to continue..
3. Power off the computer and remove the FNW-9802-T from the
computer.
The initial setting of the communication rate of the FNW-9802-T Adapter is
configured by Auto-Negotiation (AutoSense). Auto-Negotiation
automatically sets the appropriate communication rate and mode. To change
these settings, follow the procedure below:
1. Double click on the "My Computer" icon and double click on the
"Control Panel" icon.
2. Double click on the "Network" icon.
3. Select "FNW-9802-T Fast Ethernet Adapter" and click on the "Property"
button.
4. Click on the "Detailed Setting" tab.
If the "FNW-9802-T Fast Ethernet Adapter" item does not appear, the driver
may not have been installed properly. If there is an "Other Device" and if
"PCI Ethernet Controller" or "FNW-9802-T Fast Ethernet Adapter" appears
when you click on the "+" symbol on the left side, then select that and click
on the "Delete" button.
3
6
Setting the Communication Rate
Summary of Contents for FNW-9802-T
Page 2: ......
Page 51: ...89 FNW 9802 T ...
