Planet XRT-811 User Manual Download Page 85

Page: 85 / 98

Other Features and Settings

Figure 51: Routing Screen

Data - Routing Screen

RIP

Enable RIP

Check this to enable the RIP (Routing Information Protocol) feature
of XRT-811.

XRT-811 supports RIP 1 only.

Static Routing

Static Routing
Table Entries

This list shows all entries in the Routing Table.

•

The "Properties" area shows details of the selected item in the
list.

•

Change any the properties as required, then click the "Update"
button to save the changes to the selected entry.

Properties

•

Destination Network

- The network address of the remote LAN

segment. For standard class "C" LANs, the network address is
the first 3 fields of the Destination IP Address. The 4th (last)
field can be left at 0.

•

Network Mask

- The Network Mask for the remote LAN seg-

ment. For class "C" networks, the default mask is 255.255.255.0

•

Gateway IP Address

- The IP Address of the Gateway or Router

which XRT-811 must use to communicate with the destination
above. (NOT the router attached to the remote segment.)

•

Metric

- The number of "hops" (routers) to pass through to reach

the remote LAN segment. The shortest path will be used. The de-
fault value is 1.

Summary of Contents for XRT-811



































































































Search results

Summary of Contents for XRT-811

Reviews:

Related manuals for XRT-811

Brands by name

Popular brands

Planet XRT-811, User Manual

Search results

Summary of Contents for XRT-811

Reviews:

Related manuals for XRT-811

Brands by name

Popular brands