Setup
9
Configuration Program
XRT-811 contains an HTTP server. This enables you to connect to it, and configure it, using
your Web Browser.
Your Browser must support JavaScript
. The configuration program has
been tested on the following browsers:
•
Netscape V4.08 or later
•
Internet Explorer V4 or later
Preparation
Before attempting to configure XRT-811, please ensure that:
•
Your PC can establish a physical connection to XRT-811. The PC and XRT-811 must be
directly connected (using the Hub ports on XRT-811) or on the same LAN segment.
•
XRT-811 must be installed and powered ON.
•
If XRT-811's default IP Address (192.168.0.1) is already used by another device, the other
device must be turned OFF until XRT-811 is allocated a new IP Address during configura-
tion.
Using UPnP
If your Windows system supports UPnP, an icon for XRT-811 will appear in the system tray,
notifying you that a new network device has been found, and offering to create a new desktop
shortcut to the newly-discovered device.
•
Unless you intend to change the IP Address of XRT-811, you can accept the desktop
shortcut.
•
Whether you accept the desktop shortcut or not, you can always find UPnP devices in
My
Network Places
(previously called
Network Neighborhood
).
•
Double - click the icon for XRT-811 (either on the Desktop, or in
My Network Places
) to
start the configuration. Refer to the following section for details of the initial configuration
process.
Using your Web Browser
To establish a connection from your PC to XRT-811:
1. After installing XRT-811 in your LAN, start your PC. If your PC is already running, restart
it.
2. Start your WEB browser.
3. In the
Address
box, enter "HTTP://" and the IP Address of XRT-811, as in this example,
which uses XRT-811's default IP Address:
