17
Chapter 4
PC Configuration
This Chapter details the PC Configuration required on the local ("Internal")
LAN.
Overview
For each PC, the following may need to be configured:
•
TCP/IP network settings
•
Internet Access configuration
•
Printer configuration
Windows Clients
This section describes how to configure Windows clients for:
•
Internet access via XRT-811
•
Sharing the Printer connected to XRT-811.
The first step is to check the PC's TCP/IP settings.
XRT-811 uses the TCP/IP network protocol for all functions, so it is essential that the TCP/IP
protocol be installed and configured on each PC.
TCP/IP Settings - Overview
If using the default Broadband Router settings, and the default Windows
TCP/IP settings, no changes need to be made.
•
By default, XRT-811 will act as a DHCP Server, automatically providing a suitable IP
Address (and related information) to each PC when the PC boots.
•
For all non-Server versions of Windows, the default TCP/IP setting is to act as a DHCP
client.
If using a Fixed (specified) IP address, the following changes are re-
quired:
•
The
Gateway
must be set to the IP address of XRT-811
•
The
DNS
should be set to the address provided by your ISP.
If your LAN has a Router, the LAN Administrator must re-
configure the Router itself. Refer to
Chapter 8 - Advanced
Setup
for details.
4
i
Note
