Planet WNRT-627 User Manual Download Page 135

Page: 135 / 165

User’s Manual of WNRT-627

-135-

Object

Description

Log Type

By selecting the log type, only logs of this type will be shown.

Log Level

By selecting the log level, only logs of this level will be shown.

Refresh

Refresh the page to show the latest log list.

Save Log

Click to save all the logs in a txt file.

Mail Log

Click to send an email of current logs manually according to the address

and validation information set in Mail Settings.

Clear Log

All the logs will be deleted from the Router permanently, not just from the

page.

Table 5-45

Click the

Next

button to go to the next page, or click the

Previous

button to return to the previous

page.

Summary of Contents for WNRT-627






































































































































































Search results

Summary of Contents for WNRT-627

Reviews:

Related manuals for WNRT-627

Brands by name

Popular brands

Planet WNRT-627, User Manual

Search results

Summary of Contents for WNRT-627

Reviews:

Related manuals for WNRT-627

Brands by name

Popular brands