User’s Manual of WNRT-627
-41-
To build a successful connection by WPS, you should also do the corresponding
configuration of the new device for WPS function.
I. By Push Button Configuration (PBC)
If the wireless adapter supports Wi-Fi Protected Setup and the Push Button Configuration (PBC)
method, you can add it to the network by PBC with the following two methods.
Step 1:
Press the WPS/Reset Button on the front panel of the Router.
Figure 5-4
Hardware WPS/Reset Button
Or you can keep the default WPS Status as Enabled and click the Add device button in
Figure 5-5
then the following screen will appear.
Figure 5-5
Software WPS/Reset Button
Choose
Press the button of the new device in two minutes,
and click
Connect.
When pressing and holding the WPS/Reset Button on the router for more than 5
seconds, you will reset the router.