User’s Manual of WNRT-627
-49-
If you want to do some advanced configurations, please click the
Advanced
button, and the page
shown in
Figure 5-12
Figure 5-12
PPPoE Advanced Settings
The page includes the following fields:
Object
Description
MTU Size
The default MTU size is “1480” bytes, which is usually fine. It is not
recommended that you change the default
MTU Size
unless required
by your ISP.
Service Name/AC Name
The service name and AC (Access Concentrator) name, which should
not be configured unless you are sure it is necessary for your ISP. In
most cases, leaving these fields blank will work.
ISP Specified IP
Address
If your ISP does not automatically assign IP addresses to the Router
during login, please click “
Use IP address specified by ISP
” check
box and enter the IP address provided by your ISP in dotted-decimal
notation.
Detect Online Interval
The Router will detect Access Concentrator online at every interval.
The default value is “0”. You can input the value between “0” and “120”.
The value “0”
means no detect.
DNS IP address
If your ISP does not automatically assign DNS addresses to the Router
during login, please click “
Use the following DNS servers
” check box
and enter the IP address in dotted-decimal notation of your ISP’s
primary DNS server. If a secondary DNS server address is available,
enter it as well.
Table 5-5
