Planet WNRT-627 User Manual Download Page 130

Page: 130 / 165

User’s Manual of WNRT-627

-130-

5.17.5 Backup & Restore

Choose menu “

System Tools

→

Backup & Restore

”, and you can save the current configuration of

the Router as a backup file and restore the configuration via a backup file as shown in

Figure 5-91

Backup & Restore Configuration

Click the

Backup

button to save all configuration settings as a backup file in your local

computer.

To upgrade the Router's configuration, follow these instructions.

Step 1. Click the

Browse…

button to locate the update file for the Router, or enter the exact

path to the Setting file in the text box.

Step 2. Click the

Restore

button.

The current configuration will be covered by the uploading configuration file. The

upgrade process lasts for 20 seconds and the Router will restart automatically.

Keep the Router power on during the upgrading process to prevent any damage.

5.17.6 Reboot

Choose menu “

System Tools

→

Reboot

”, and you can click the

Reboot

button to reboot the Router

via the next screen.

Figure 5-92

Reboot the Router

Summary of Contents for WNRT-627






































































































































































Search results

Summary of Contents for WNRT-627

Reviews:

Related manuals for WNRT-627

Brands by name

Popular brands

Planet WNRT-627, User Manual

Search results

Summary of Contents for WNRT-627

Reviews:

Related manuals for WNRT-627

Brands by name

Popular brands