Planet WDRT-1202AC, User Manual

Page: 51 / 89

User Manual of WDRT-1202AC
-45-
Object Description
Status
You may choose to enable or disable Wireless function.
Wi-Fi Name (SSID)
Set a name (SSID) for your wireless network. User can access
the wireless network through the ID only. However, if you switch
to client mode, this field becomes the SSID of the AP you want
to connect with.
Default:
PLANET_5G_XXXX
(“X” means the last 4 digits of the MAC address.)
Password
Enter the Wi-Fi password
Security Mode
Select the security mode from the
Security Mode
dropdown list.
There are 2 options in the Security Mode dropdown list:

None

WPA/WPA2-Personal
802.11 Mode
Set the wireless mode to which you need. Default is “
Mixed
802.11a/n/ac
”. It is strongly recommended that you set the Band
to “802.11a/n/ac”, and al l of 802.11a, 802.11n, and 802.11ac
wireless stations can connect to the WDRT-1202AC.
Wi-Fi Country/Region
You may select the country close to you.
Wi-Fi Channel
For an optimal wireless performance, you may select the least
interferential channel. It is advisable that you select an unu sed
channel or “
Auto
” to let device detect and select the best possible
channel for your wireless network to operate on f rom the
drop-down list.
Transmission Power
Set the transmit power of router. The default is
“High
”.
Channel Width
Select a proper channel bandwidth to enhance wireless
performance. When there are 11a/n and 11ac wireless clients,
please select the 20/40/80MHz frequency band.
Visibility Status
You may choose to visible or invisible SSID broadcast. When it is
enabled, the router SSID will be b roadcast in the wireless
network, so that it can be scanned by wireless clients and they
can join the wireless network with this SSID.
Schedule
Select “Always Enable” or configure the schedule for some
devices to access.