Planet WAP-200N, User Manual, Page: 89 / 118

User Manual of WAP-200N/WBS-200N
-88-
•
Community Name
(Read/Write)
Enter the password for accessing the SNMP community for read and
write access.
•
Trap Destination Address
Enter the IP address where SNMP traps are to be sent.
•
Trap Destination
Community Name
Enter the password of the SNMP trap community.
•
SNMPv3
Enable or Disable the SNMPv3 feature.
•
User Name
Specify the username for SNMPv3.
•
Auth Protocol
Select the authentication protocol type: MD5 or SHA.
•
Auth Key (8-32 Characters)
Specify the authentication key for authentication.
•
Priv Protocol
Select the privacy protocol type: DES.
•
Priv Key (8-32 Characters)
Specify the privacy key for privacy.
•
Engine ID
Specify the engine ID for SNMPv3.
•
Save/Apply
Click Save/Apply to apply all changes.
•
Cancel
Click Cancel to cancel the settings.
5.6.4 Backup/Restore Settings
Click “ Management

Backup/Restore Settings ” and the following page will be displayed.
Figure 5-51 Backup/Restore Settings
The page includes the following settings:
Object Description
•
Save A Copy of Current
Settings
Click Backup to save the current configured settings.
•
Restore Saved Settings
from A File
To restore settings that have been previously backed up, click Choose
File to select the file, and click Restore .
•
Revert to Factory Default
Settings
Click Factory Default to restore the device to its factory default settings.