Planet WAP-200N, User Manual, Page: 72 / 118

User Manual of WAP-200N/WBS-200N
-71-
Figure 5-34 Wireless Network – CB/WDS STA/CR/Repeater Mode
The page includes the following settings:
Object Description
•
Wireless Mode
Wireless mode supports 802.11b/g/n mixed modes.
•
SSID
Specify the SSID if known. This field is completed automatically if you
select an Access Point in the Site Survey.
•
Site Survey
Scans nearby locations for Access Points. You can select a discovered
Access Point to establish a connection.
•
Prefer BSSID
Enter the MAC address if known. If you select an Access Point in the Site
Survey, this field is completed automatically.
•
Wireless Security Refer to section 5.5.3 Security Setting .
•
Accept
Click Accept to apply the setting.
•
Cancel
Click Cancel to cancel the unsaved changes and revert to the previous
settings.
5.5.2 WDS Link Settings
Go to the “ Operation Mode ” page to configure the device as “ WDS Bridge ” and then go to “ Wireless

WDS
Link Settings ” to configure the WDS link settings including PtP (Point to Point) or PtMP (Point to Multiple Points)
applications.