User Manual of WAP-200N/WBS-200N
-60-
assigned a different address.
•
PPPoE:
Point-to-Point Protocol over Ethernet (PPPoE) is used mainly
by ISPs that provide DSL modems to connect to the Internet.
•
PPTP:
The point-to-point tunneling protocol (PPTP) is used in
association with virtual private networks (VPNs).
Options:
This section will not be the same depending on the Internet Connection Type.
Refer to settings of each corresponding section from 5.4.2.1 to 5.4.2.4
Domain Name Server (DNS) Address
•
Get Automatically From ISP
Select it to obtain the DNS automatically from the DHCP server.
•
Use These DNS Servers
Select it to set up the Primary DNS and Secondary DNS servers
manually.
•
Primary DNS
Enter the primary DNS server address.
•
Secondary DNS
Enter the secondary DNS server address.
WAN Ping
•
Discard Ping on WAN
Check it to enable pings on the WAN interface or disable to block pings on
the WAN interface.
•
Accept
Click
Accept
to apply the setting.
•
Cancel
Click
Cancel
to cancel the setting.
5.4.2.1.
DHCP
Select
DHCP
and the device will automatically obtain IP addresses, subnet masks and gateway addresses from
the ISP.
Summary of Contents for WAP-200N
Page 1: ...I...
Page 51: ...User Manual of WAP 200N WBS 200N 50 Figure 5 11 Main Status...