Planet WAP-200N, User Manual, Page: 75 / 118

User Manual of WAP-200N/WBS-200N
-74-
In the WDS Bridge mode, select Security Mode on the “ WDS Link Settings ” page to configure the wireless
security settings. The security settings in each site of the WDS link must be configured to the same.
Figure 5-38 Security Settings – WDS Bridge Mode
The option includes the following settings:
Object Description
•
Security Mode
Select the suitable security mode from the drop-down list to encrypt the
wireless network. The options include Disabled, WEP, WPA-PSK,
WPA2-PSK, WPA-PSK Mixed, WPA, WPA2, and WPA Mixed . The latest
WPA2-PSK mode is strongly recommended to use.
1. The WEP and WPA/WPA2 with TKIP didn't support in pure 802.11n mode and these options will
not available in pure 802.11n mode.
2. In 802.11b/g/n mixed mode, if configured the security to WEP, WPA/WPA2 with TKIP, the
connection mode/speed will be changed from 802.11n to 802.11g.

Disabled
Authentication is disabled and no password/key is required to connect to the access point.

WEP
WEP (Wired Equivalent Privacy) is a basic encryption. For a higher level of security, consider using the WPA
encryption.