Planet VIP-321 User Manual Download Page 8

Page: 8 / 63

Chapter 1

Introduction

Overview

With years of Internet telephony and VoIP manufacturing experience, PLANET now

introduces the newest member of the PLANET DECT (Digital Enhanced Cordless

Telecommunications) Station VoIP Phone family: the VIP-321.

As a direct response to feedback from our customers, PLANET's new DECT VoIP Phone,

the VIP-321, not only provides quality voice communications and Internet sharing

capabilities with other LAN users but also offers DECT interface for daily cordless

telephony communications.

With advanced DSP processor and cutting edge of VoIP technology, the PLANET

VIP-321 is capable of handling VoIP telephony into cordless transmission and up to 3

registrations to the SIP proxy. The VIP-321 is able to make calls to either Peer-to-Peer or

voice communication in SIP proxy mode environment. The VIP-321 is the ideal choice for

Voice over IP communications and providing integrated Internet sharing features, such

as DHCP server, Virtual server and DMZ support. With these features, users may now

enjoy high quality voice calls and secure Internet access without interfering with routine

activities. To bring the most flexibility to users with the add-on RJ-11 interface for PSTN

connection, users not only can make the daily PSTN communication but also enjoy the

convenience brought by VoIP communications.

With built-in DECT and compatible base of GAP, up to 5 DECT handsets can be

registered on the VIP-321. The pan-European users can get benefit from the DECT

interface, and the voice communications can be established from anywhere in the living

space. The PLANET VIP-321 comes with an intuitive, user-friendly and powerful web

management interface so that users can enjoy the ease-of-use and no expertise required

for the VoIP communications.

Summary of Contents for VIP-321
































































Search results

Summary of Contents for VIP-321

Reviews:

Related manuals for VIP-321

Brands by name

Popular brands

Planet VIP-321, User Manual

Search results

Summary of Contents for VIP-321

Reviews:

Related manuals for VIP-321

Brands by name

Popular brands