Step5. Press
the
Up
or
Down
key to choose the base number you want. Press the
SELECT
key in
order to search the base. The display shows
"Searching:”
Step6. Press
SELECT
key to confirm, then the display asks you to enter the base PIN code (preset
to
1590
) which acts as phone's authentication code (AC). Enter this code and press the
SELECT
key.
Step7. If the registration has performed successfully, the new handset will show the phone and base
numbers (e.g. HS (2) BS (1)) and returns to Standby mode.
Deactivating a Hand
If
set
ration of a registered handset in order to stop its access to one or
t deactivate the handset you are using. Just follow these steps.
necessary, you can clear the regist
more base units, but you can no
Step1. Press
MENU
key to display the main menu items.
Step2. Press the navigation keys repeatedly to choose , and then press the
SELECT
key.
Enter the current base
(preset to 1590) , then pre
PIN Code
SELECT
ss the
key.
Step3. To
select
BASE Cfg
item, then press the
Up
or
Down
key to choose
Remove Handset
and
then press the
key.
SELECT
Step4.
Press the numeric key related to the handset number you want to clear the registration, and
then press the
key.
SELECT
NOT SUB
se.
The display of the handset which you have cleared the registration shows
and it
cannot be used anymore with the ba
Setting Date & Time
In
show the current date and time to help you keep your appointments.
he date and time so that the date and time when messages or calls are
Standby mode, the unit can
However, you need to set t
received can be displayed correctly.
Step1. Press
MENU
nu items.
key to display the main me
Step2. Press the navigation keys repeatedly to choose , then press the
SELECT
key to
r line in the
Step3.
The handset can be registered to up to four different base
units in order to extend the radio coverage.
Í
Note
choose
, the current settings are displayed: the time on the uppe
Clock
Hours:
Minutes
format and the date in the
Day – Month
format in.
Please enter the current date and time using the number keypad (4 digits for each as
explained)
Step4. Press
the
SELECT
key to save the setting.
