Planet VIP-321 User Manual Download Page 28 | Manualshive

Page: 28 / 63

background image

Register Name

Please input the Register Name get from your ISP.

Register Password

Please input the Register Password get from your ISP.

Domain Server

Please input the Domain Server get from your ISP.

Proxy Server

Please input the Proxy Server get from your ISP.

Outbound Proxy

Please input the Outbound Proxy get from your ISP. If your ISP does not

provide the information, then you can skip this item.

Subscribe for MWI

User can hear indicate tone in handset when have some new message.

Switch to PSTN

In direct switch to PSTN for incoming SIP call.

Status

To show up current register status.

You can see the Register Status in the Status item. If the item shows “

Registered

”, then your Phone

Adapter is registered to the ISP, you can make a phone call direcly.

If you have more than one SIP account, you can following the steps to register to the other ISP.

When you finished the setting, please click the Submit button.

The VIP-321 can register to three different SIP Proxies at the same time. It can receive any one of

different SIP accounts incoming call, and it can switch to any one SIP accounts for making calls

through input the switch code.

«
...
26
27
28
29
30
...
»

Summary of Contents for VIP-321
































































Reviews:

No comments

Related manuals for VIP-321

Brand: Sagem Pages: 72

Brand: Sagem Pages: 63

Brand: Sagem Pages: 77

Redmi Note 10 JE

Brand: Xiaomi Pages: 10

Brand: Collage Investments Pages: 34

Brand: Sagem Pages: 105

Brand: Hanlong Pages: 60

Brand: AEI COMMUNICATIONS Pages: 5

Multi-Line Command Center

Brand: Rath Pages: 11

Brand: UTStarcom Pages: 55

Brand: Blu Pages: 27

Brand: Teldat Pages: 165

Brand: Alcatel Pages: 21

Brand: IPRO Pages: 16

Brand: Nokia Pages: 20

Brand: Dukane Pages: 148

Brand: Lava Pages: 2

Brand: OKAPI Pages: 14

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands