17
4.2 Point-to-Multipoint Application -- Connect to IP
DSLAM
To build a local Internet in apartment, hotel and campus and
hospitality environments, it requires:
¾
The multi-port VDSL2 IP DSLAM or VDSL2 switch (for
example, PLANET VC-820M) operates as a
CO Master
and
needs to be placed in the wiring center (MDF room) and
connects to the telephone line system.
¾
On the other hand, it needs to install a
CPE Slave
(VC-231/
VC-234 VDSL2 Bridge) on the individual client side and
connect to the Multi-port Master through the telephone lines.
UP to 1.4km
LAN2
Router
LAN1
Ethernet over VDSL2 and Telephone Network
Main office/PBX,
Telco CO,
wire closet
VDSL2 Switch
(Multi-port CO)
Internet
Telephone wire
VC-231/CPE
VC-231/CPE
Splitter
Splitter
VDSL2
VDSL2
Refer to the following procedure to set up the VDSL2 Bridge to
IP DSLAM connection.
1
.
[Remote End]
Set the remote IP DSLAM/VDSL2 switch to
CO
mode with proper VDSL2 profile.
2.
[Local End]
Set the VDSL2 Bridge at the local end to
CPE
mode from the DIP switch.
Summary of Contents for vc-231
Page 1: ...Ethernet over VDSL2 Bridge VC 231 VC 234 User s Manual ...
Page 27: ......
Page 28: ......
