16
Up to 1.4km
VDSL2
Telephone wire
Ethernet over VDSL2 and Telephone Network
Main office/PBX,
Telco CO,
wire closet
LAN1
LAN2
VC-231/CO
VC-231/CPE
Splitter
Splitter
Refer to the following procedures to set up the VDSL2 Bridge
LAN to LAN connection.
1.
[LAN1]
Set the VDSL2 Bridge at LAN 1 to be
CO
mode from
the DIP switch.
2.
[LAN2]
Set the VDSL2 Bridge at LAN 2 to be
CPE
mode
from the DIP switch.
3. Power on the VDSL2 Bridge CO and CPE at both sides by
connecting its power source.
4. Power LED will illuminate.
5. Connect VDSL line from another VDSL device to RJ11
VDSL
port
of the VDSL2 Bridge.
6.
VDSL LNK LED
will blink to illuminate at both VDSL2
bridges.
7. Connect telephone to the RJ11
Phone port
of the VDSL2
Bridge.
8. Connect the VDSL2 Bridge Ethernet
LAN port to
other
network device via regular Cat.5 UTP cable for VC-231/
VC-234.
Summary of Contents for vc-231
Page 1: ...Ethernet over VDSL2 Bridge VC 231 VC 234 User s Manual ...
Page 27: ......
Page 28: ......
