Multi-Homing Security Gateway User’s Manual
Auto-Connect when sending packet through the link
: Check to enable the auto-connection
whenever there’s packet to transmit over the connection. The feature will be disabled
automatically if
always-connect
is checked.
Auto-Disconnect if idle minutes
: Configure this device to disconnect to the PPTP Server
when there is no activity for a predetermined period of time. To keep the line always
connected, set the number to 0. The feature will be disabled automatically if
always-connect
is checked.
Schedule
:
Click the down arrow to select the schedule, which was pre-determined in Schedule.
Refer to the corresponding section for details.
NAT
:
Check this feature if the remote PPTP Server belongs to Windows Server based.
Step 3.
Click
OK
to save modifications or click
Cancel
to cancel modifications.
Modifying PPTP Client
Step 1.
Select
VPN
→
PPTP Client
.
Step 2.
In
the
PPTP Client
window, find the PPTP server that you want to modify and click
Modify
.
Step 3.
Enter appropriate settings.
Step 4.
Click
OK
to save modifications or click
Cancel
to cancel modifications
Removing PPTP Client
Step 1.
Select
VPN
→
PPTP Client
.
Step 2.
In
the
PPTP Client
window, find the PPTP client that you want to modify and click
Remove
.
Step 3.
Click
OK
to remove the PPTP client or click
Cancel
to exit without removal.
- 178 -