Multi-Homing Security Gateway User’s Manual
Authentication Port:
The port number used for user login page. When user want to access WAN network
and the authentication (Policy -> Outgoing) is enabled, the user has to send http request with this port number.
MH-2K/MH-4K will send a User Login page for user to input user name and password. For example, if the
gateway IP address is 192.168.1.1 and authentication port is 82, user have to open a web browser and input
on the address file to have the user login page.
Re-Login if Idle:
When the LAN user access to WAN network and do not use for a while, the connection will
be time-out. User has to re-login again. The default time is 30 minutes and you can configure this time by
“System”-> “Setting” page.
Re-Login after user login successfully:
When user login authentication page successfully access WAN for
a while, MH-2K/MH-4K will asking user login again. The default time is unlimited time.
Disallow Re-Login auth user has login:
when the user login authentication page, can not login same
account again on other web page.
URL to redirect when authentication succeed:
You can set up the default webpage to force user to access
it first when user passes the authentication.
Messages to display when user login:
You can specify a message to display at user’s login page when
user passes the authentication.
4.7.2 Auth User
Click
Authentication
in the menu bar on the left hand side and click
Auth User
.
- 82 -