Multi-Homing Security Gateway User’s Manual
Step 2:
Enter the IP Address in the website name column of the new window.
Alias IP of LAN Interface: Enter Local port IP Address.
Netmask: Enter Local port subnet Mask.
WAN Interface IP: Add WAN 1 or WAN 2 IP.
Forwarding Mode: Click the NAT button below to setup.
Step 3:
Click OK to add Multiple Subnet or click Cancel to discard changes.
Modify a Multiple Subnet:1
Step 1:
Find the IP Address you want to modify and click Modify.
Step 2:
Enter the new IP Address in Modify Multiple Subnet window.
Step 3:
Click the OK button below to change the setting or click Cancel to discard changes.
Removing a Multiple Subnet:
Step 1:
Find the IP Address you want to delete and click Delete.
Step 2:
A confirmation pop-up box will appear, click OK to delete the setting or click Cancel to discard
changes.
Routing Mode
Multiple Subnet allows local port to set Multiple Subnet Routing Mode and connect with the internet through
different WAN IP Addresses.
- 26 -