Planet IPX-1980 User Manual Download

Page: 44 / 88

Allow multiple extensions to be

assigned to one analog phone

Allow multiple extensions to be assigned to one analog

phone.

Allow extensions to be Alpha

Numeric (SIP/IAX users)

If extension is Alpha, outside line can't call in, but

extension can call out.

VoiceMail

This user will have a voicemail account after choosing this

option.

NAT

Check this option if the User or Phone is located behind a

NAT (Network Address Translation) enabled gateway.

SIP

Check this option if the User or Phone is using SIP or is a

SIP device.

IAX2

Check this option if the User or Phone is using IAX2 or is

an IAX2 device.

Call Waiting

Check this option if the User or Phone should have

Call-Waiting capability.

。

3-Way Calling

Check this option if the User or Phone should have 3-Way

Calling capability.

VM Password

Voicemail Password for this user, e.g.: "1234".

Delete VMail

Voicemail will not be checkable by phone if you chose this

option. Messages will be sent by e-mail only. Note: you

must configure SMTP server for this functionality.

4.1.2 General

Item

Explanation

Caller ID Detection

For FXO trunk lines, this option causes PBX to look for

Caller ID on incoming calls

Caller ID Signalling

Set the Type of caller ID signaling in use.

Summary of Contents for IPX-1980

























































































Search results

Summary of Contents for IPX-1980

Reviews:

Related manuals for IPX-1980

Brands by name

Popular brands

Planet IPX-1980, User Manual

Search results

Summary of Contents for IPX-1980

Reviews:

Related manuals for IPX-1980

Brands by name

Popular brands