Planet IPX-1980 User Manual Download

Page: 18 / 88

1. To login IPX-1980 must segment PC to same domain as IPX-1980

AN or LAN IP address.

2. For security reason, please modify the username and password after

ou login. You can modify in this page: “System”---“Management”

Every Time after save the change please press the “Activate

hanges“ to make modification effect.

If username and password are right, this following page will be displayed:

Network

WAN/ LAN Port IP will be displayed

Storage

Total storage and used storage will be displayed

Channels

Channel information will be based on the product model

Device Info

Product Model and System Version will be displayed

1. if FXO without connection, the color will be Orange.

2. if FXO do connected, the color will be Green, also the front panel LED will

e lighting.

Summary of Contents for IPX-1980

























































































Search results

Summary of Contents for IPX-1980

Reviews:

Related manuals for IPX-1980

Brands by name

Popular brands

Planet IPX-1980, User Manual

Search results

Summary of Contents for IPX-1980

Reviews:

Related manuals for IPX-1980

Brands by name

Popular brands