2.3 Remote Management
The function can enable users to manage the Internet Telephony PBX system at remote sites
and to allow technical person to assist you in solving network problem.
Step 1.
Go to
Network & Country
→
HTTP port and Remote Administration
.
Figure 2-5. HTTP port and Remote Administration
Step 2.
Mark
Remote Administration
to active it. And then enter the control port you want to
e default value is
80
.
use. Th
to acce
Click
S
ipconf
192.16
Step 3.
Click
Apply
to save the configuration. And you can type the
http://WAN IP address:
ss the IPX-1980 from the remote side.
Step 4.
To verify the IP addresses of your computer and the Internet Telephony PBX system.
tart
form Windows
→
Run.
Type the
cmd
to open the command window, then type
ig
for getting default gateway address. In the below case, the default gateway is
8.0.1 and the user’s PC is 192.168.0.100.
Figure 2-8. Check the IP address for the PC and IPX-1980
Every Time after save the change please press the “Activate
Changes“ to make modification effect.