background image

 

FCC Caution: 

To assure continued compliance (example-use only shielded interface cables when connecting to 
computer or peripheral devices). Any changes or modifications not expressly approved by the party 
responsible for compliance could void the user’s authority to operate the equipment. 
This device complies with Part 15 of the FCC Rules. Operation is subject to the Following two conditions: 
(1) This device may not cause harmful interference, and (2) this Device must accept any interference 
received, including interference that may cause undesired operation. 

 

R&TTE Compliance Statement 

This equipment complies with all the requirements of DIRECTIVE 1999/5/EC OF THE EUROPEAN 
PARLIAMENT AND THE COUNCIL OF 9 March 1999 on radio equipment and telecommunication 
terminal Equipment and the mutual recognition of their conformity (R&TTE) 
The R&TTE Directive repeals and replaces in the directive 98/13/EEC (Telecommunications Terminal 
Equipment and Satellite Earth Station Equipment) As of April 8, 2000. 

 

WEEE Caution 

To avoid the potential effects on the environment and human health as a result of the presence 
of hazardous substances in electrical and electronic equipment, end users of electrical and 
electronic equipment should understand the meaning of the crossed-out wheeled bin symbol. 
Do not dispose of WEEE as unsorted municipal waste and have to collect such WEEE 
separately.  

 

Safety 

This equipment is designed with the utmost care for the safety of those who install and use it. However, 
special attention must be paid to the dangers of electric shock and static electricity when working with 
electrical equipment. All guidelines of this and of the computer manufacture must therefore be allowed at 
all 
times to ensure the safe use of the equipment. 

 

Customer Service 

For information on customer service and support for the Gigabit SSL VPN Security Router, please refer to 
the following Website URL:   
 
http://www.planet.com.tw 
 
Before contacting customer service, please take a moment to gather the following information:   

  Internet Telephony PBX System serial number and MAC address 

  Any error messages that displayed when the problem occurred 

  Any software running when the problem occurred 

  Steps you took to resolve the problem on your own 

 

Revision 

User’s Manual for PLANET Internet Telephony PBX System 

Model: IPX-1980 

Rev: 1.0 (June, 2012) 

Summary of Contents for IPX-1980

























































































Reviews: