User’s Manual of ICS-2x00T Serial Device Server Series
40
4.2.5 Console
This page is to configure management methods for web and remote console. The screen in
Figure 4-2-5
appears.
Figure 4-2-5:
Console Setup Page Screenshot
The page includes the following fields:
Object
Description
•
Web Console
To enable or disable access to the web console. The default is
Enable
.
•
Remote Console
To enable or disable access to the remote console. The default is
Enable
.
•
Current Time
To check whether the reset button is working or not. The default is
No
.
4.2.6 Fault Alarm
This page provides configuration for fault alarm. The screen in
Figure 4-2-6
appears.
Figure 4-2-6:
Fault Alarm Control Page Screenshot
The page includes the following fields:
Object
Description
•
Buzzer
To check whether Buzzer is enabled on this switch.
•
Record
To check whether Record is sending System log or SNMP Trap or both.
•
Event
To check whether Power, Connection, etc. are working or not.
•
Power Alarm
PWR1 or PWR2 or both have faulted..
•
Monitoring of DCD Change
Monitor which Port or all for DCD signal that has changed.
•
Monitoring of DSR Change
Monitor which Port or all for DSR signal that has changed.
