manualshive.com logo in svg

Planet ICA-5150, User Manual

Share
Download
Planet ICA-5150 User Manual Download Page 56

                                                                  Ultra-mini HD Vandal Dome IP Camera   

                                                                                                                                                        ICA-5150

 

 

 

56

versus video quality under the limited bandwidth. 

GOP Control

 

Defines the Intra/Inter-frame (I/P) ratio of this profile. For example, 
set the GOP to 30, then the video stream will have one Intra-frame 
every 30 frames. 

Multicast 

Enable or disable the multicast function. 

Multicast Video 

IP address and port for multicast video streaming of the selected 
profile. 

Multicast Audio 

IP address and port for multicast audio streaming of the selected 
profile 

Time to Live 

Time to live (TTL) is a mechanism that limits the lifespan of data in a 
computer or network. Once the prescribed event count or time span 
has elapsed, data is discarded. TTL prevents a data packet from 
circulating indefinitely. 

Always Enable 
Multicast 

Multicast streaming is always enabled or by request 

Warning!!! 

To enable the multicast streaming, make sure your Intranet does support multicast 
function. Otherwise, your Intranet may fall into network storm seriously.

 

3.8.4 ONVIF Profile 

ONVIF protocol defines profile of video streams. In case, the NVR, CMS and/or VMS connect to 
this device via ONVIF protocol. Use this page to define parameters of video streams.   

 

 

Summary of Contents for ICA-5150



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands