manualshive.com logo in svg

Planet ICA-5150, User Manual

Share
Download
Planet ICA-5150 User Manual Download Page 43

                                                                  Ultra-mini HD Vandal Dome IP Camera   

                                                                                                                                                        ICA-5150

 

 

 

43

 

UPnP 

To enable or disable the UPnP service here. 

Friendly Name 

Shows the friendly name of this device here.   

UPnP NAT Traversal 

When enabled, the device will attempt to configure port mapping in 
a NAT router on your network, using UPnP™. Note that UPnP™ 
must be enabled in the NAT router first. 

Port Range 

The port range will open in NAT router.   

External IP address 

Shows the IP address and port for WAN access through Internet. If 
NAT traversal is configured successfully, user can use this IP 
address and port to access this device. 

3.5.8 Bonjour 

The Bonjour service allows IP camera to be discovered with Apple Safari browser applied, once 
enabled, the IP camera will show the Friendly Name in the Bonjour bookmark menu of Safari 
browser. 

 

 

Bonjour 

To enable or disable the Bonjour service here. 

Friendly Name 

Shows the friendly name of this device here.   

3.5.9 IP Filter 

You can enter different user IP addresses which are allowed to enter or deny by the device.

 

Summary of Contents for ICA-5150



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands