manualshive.com logo in svg

Planet ICA-5150, User Manual

Share
Download
Planet ICA-5150 User Manual Download Page 11

                                                                  Ultra-mini HD Vandal Dome IP Camera   

                                                                                                                                                        ICA-5150

 

 

 

11

Chapter 2.  Hardware Interface   

2.1 Physical Descriptions 

2.1.1 Identification of ICA-5150 physical details 

 

 

 

Interface 

Description 

Lens 

User could adjust the angle of the lens manually. 

Micro-SD 

User can insert a micro SD card into this slot for event recording. 

Factory Default Reset 

This button is used to restore all the factory default settings. 
Sometimes restarting the device will make the system back to a 
normal state. However, if the system still got problems after 
restart, user can restore the factory default settings and configure 
it again.   

 

Steps:  
1.Turn off the Camera first.   
2. Press and hold this button continuously.   
3. Power on this camera.   
4. Wait until orange LED is on. Once the Camera begins to 
operate again, the device has been restored to default settings.   

 

Note: After resetting to default, please login the camera using the 
default IP (http://192.168.0.20), and username (admin) and 

Summary of Contents for ICA-5150



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands