manualshive.com logo in svg

Planet ICA-5150, User Manual

Share
Download
Planet ICA-5150 User Manual Download Page 13

                                                                  Ultra-mini HD Vandal Dome IP Camera   

                                                                                                                                                        ICA-5150

 

 

 

13

                     

 

 

3. Set the mounting base onto the wall or ceiling and center it over the mounting hole, using the 
supplied two retaining screws to secure the main body.   
 

 

 

4. To adjust lens, move the camera body by pan and/or tilt manually and set the focus by 
turning the lens.   
 
5. Connect the LAN cable to Ethernet’s switch with PoE function.   
 
6. Once you have installed the camera well and powered it on, the Power LED (orange) 
will turn on later. The Power LED is turned on, meaning the system is booting up 
successfully. Furthermore, if you have a proper network connection, and access to the 
camera, the LAN LED (green) will flash. 
 
7. When the camera cabling is completed, close the top cover dome housing and 
secure it by two screws. 
 

                     

 

Summary of Contents for ICA-5150



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands