manualshive.com logo in svg

Planet ICA-5150, User Manual

Share
Download
Planet ICA-5150 User Manual Download Page 21

                                                                  Ultra-mini HD Vandal Dome IP Camera   

                                                                                                                                                        ICA-5150

 

 

 

21

After keying in the new username and password, click the “

Submit

” button to perform your setting 

accordingly. Click the “

<<

” button to go back to the previous page. 

 

2.5 Using UPnP of Windows XP or 7 

2.5.1 Windows XP 

UPnP™ is short for Universal Plug and Play, which is a networking architecture that provides 
compatibility among networking equipment, software, and peripherals. This device is an UPnP 
enabled device. If the operating system, Windows XP, of your PC is UPnP enabled, the device will 
be very easy to configure. Use the following steps to enable UPnP settings only if your operating 
system of PC is running Windows XP. 

Please note that MS Windows 2000 does not support UPnP feature. 

 

Go to 

Start > Settings

, and

 

Click 

Control Panel

.

 

 

The “

Control Panel

” will display on the screen and double-click “

Add or Remove Programs

”

 

to 

continue. 

 

 

 

 

 

 

 

 
 

Summary of Contents for ICA-5150



























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands