Broadband Router User Guide
18
Note:
Please find below NTP server web address for your reference to set the time
server.
http://www.eecis.udel.edu/~mills/ntp/clock1.htm
http://www.eecis.udel.edu/~mills/ntp/clock2.htm
Protocol:
Two options of NTP or Time are available for your selection to link with the Time
Server. The default setting is NTP.
TimeZone:
System administrator must select the time zone for the region.
Please refer to the
appendix for the time zone selection table.
To set the Date Time manually select
“
Set Manually
”
and system administrator must
enter the Date and Time in the respective field manually.
Note:
When you select Set Manually, each time ICA-100 series is powered off and
on you must re-enter the details once again due to time lost.
Save/Cancel:
After making sure all settings in the DateTime are correct, click on the
“
Save
”
icon to
store the settings for ICA-100 series. You can alternatively click on the
“
Cancel
”
icon
to restore all settings to the values last saved to or retrieved from ICA-100 series.
Trigger
The Trigger menu contains commands for the I/O Trigger connectors providing the
physical interface for 2 digital output and 2 digital input that is used for connecting a
diversity of external alarm devices to ICA-100 series such as IR-Sensor and alarm
relay. Click on
“
Trigger
”
in the system administration menu bar and the Trigger
screen will appear as illustrated below:
Summary of Contents for ICA-100
