720p SIP Vandalproof Door Phone with PoE
HDP-1160PT
54
Security Settings
Field Name
Description
Input Settings
Input Detect
Enable or disable Input Detect.
Trigger Mode
When choosing the low level trigger (closed trigger), detect the input port
(low level) closed trigger.
When choosing the high level trigger (disconnected trigger), detect the
input port (high level) disconnected trigger.
Alert message sends to server
Set the Alert message send to server
Output Settings
Output Response
Enable or disable Output Response.
Output Level
When choosing the low level trigger (NO: normally open), when meet the
trigger condition, trigger the NO port disconnected.
When choosing the high level trigger (NO: normally close), when meet the
trigger condition, trigger the NO port close.
Output Duration
Changes in port, the duration of. The default is 5 seconds.
Alert Trigger Settings
Alarm Ring Duration
Set the Alarm Ring Duration. The default is 5 seconds.
Input trigger
When the input port meets the trigger condition, the output port will be
triggered (The Port level time change, By < Output Duration > control).
By duration
Port switch amount change time, press <output duration>
control.
By Calling
State
By call state control, after the end of the call, port to return
the default state.
Remote DTMF trigger
Receive the DTMF password sent by the remote device. If it is correct,
trigger the corresponding output port. You can choose to enable or disable
