Planet HDP-1160PT User Manual Download Page 10

Page: 10 / 62

720p SIP Vandalproof Door Phone with PoE

HDP-1160PT

1.3 Specifications

Product

HDP-1160PT

Video

Image Device

2 megapixels with 1/2.7” color CMOS

Video Compression

H.264

Resolution

Main stream: 1280 × 720@25fps

Sub stream: 704 × 576(D1)@25fps

Viewing Angle

112° (H), 84° (V)

Minimum Illumination

0.1lux with infrared illumination

IR Illuminations

IR LED x 2, effective up to 5 meters

*The IR distance is based on the environment.

Audio

Audio Streaming

Two-way audio

Microphone

Built-in microphone and speaker input

Narrowband Codec

G.711a/u, G.723.1, G.726-32K, G.729AB

Wideband Codec: G.722

DTMF

In-band, Out of Band DTMF (RFC2833) and SIP INFO

Audio Output

Full-duplex Acoustic Echo Canceller (AEC) – a tail length of

96ms in hands-free mode

Audio Features

Voice Activity Detection (VAD)

Comfort Noise Generation (CNG)

Background Noise Estimation (BNE)

Packet Loss Concealment (PLC)

Dynamic Adaptive Litter Buffer up to 300ms

Protocol and Security

Protocols

IETF SIP (RFC 3261 and companion RFCs), SIP2.0 over

UDP/TCP/TLS, RTP/RTCP/SRTP, STUN, DHCP, LLDP,

PPPoE, 802.1x, L2TP, OpenVPN, SNTP, FTP/TFTP,

HTTP/HTTPS and TR-069

Security

Network access authority authentication: 802.1x

Web Filter, Transport Layer Security (TLS)

Secure Real-time Transport Protocol (SRTP)

NAT traversal: STUN mode

Summary of Contents for HDP-1160PT































































Search results

Summary of Contents for HDP-1160PT

Reviews:

Planet HDP-1160PT, User Manual, Page: 10 / 62

Search results

Summary of Contents for HDP-1160PT

Reviews: