720p SIP Vandalproof Door Phone with PoE
HDP-1160PT
13
Function Key LED State
Type
LED
State
DSS Key (Speed dial button)
Normally on
Successfully registered
Quick flashing
Registration failed/network abnormal
Slow flashing
In call
Interface Description
Open the rear case of the device, there is a row of terminal blocks for connecting the power supply, electric
lock control, etc. The connection is as follows:
Number
Description
Wiring port description
(example above)
1
Ethernet interface: Standard RJ45 interface, 10/100M
adaptive; it is recommended to use Cat 5e cable
-
2
Power interface: 12V,1A input
Left: positive (+)
Right: grounded (-)
3, 5
Two groups of short-circuit input detection interfaces:
For connecting switches, infrared probes, door
magnets, vibration sensors and other input devices
Left: IN
Right: OUT
4, 6
Two groups of short-circuit output control interface:
Used to control electric locks, alarms, etc.
Left (NC): Normally Close
Contact
Center (COM): Common Contact