720p SIP Vandalproof Door Phone with PoE
HDP-1160PT
34
becomes part of the server’s network. The network transmission of the device may be routed through the VPN
server.
For some users, especially enterprise users, a VPN connection might be required to be established before
activating a line registration. The device supports two VPN modes, Layer 2 Transportation Protocol (L2TP)
and OpenVPN. The VPN connection must be configured and started (or stopped) from the device web portal.
L2TP
To establish a L2TP connection, users should log in to the device web portal, open webpage [
Network
] >>
[
VPN
]. In VPN Mode, check the “Enable VPN” option and select “L2TP”, then fill in the L2TP server address,
Authentication Username, and Authentication Password in the L2TP section. Press “Apply” then the device
will try to connect to the L2TP server.
When the VPN connection is established, the VPN IP Address should be displayed in the VPN status. There
may be some delay of the connection establishment. User may need to refresh the page to update the status.
Once the VPN is configured, the device will try to connect with the VPN automatically when the device boots