720p SIP Vandalproof Door Phone with PoE
HDP-1160PT
39
SIP
Field Name
Description
Advanced Settings
Subscribe For Voice Message
Enable the device to subscribe a voice message waiting notification; if
enabled, the device will receive notification from the server if there is voice
message waiting on the server.
Voice Message Number
Set the number for retrieving voice message.
Voice Message Subscribe
Period
Set the interval of voice message notification subscription.
Enable DND
Any incoming call to this line will be rejected automatically.
Blocking Anonymous Call
Reject any incoming call without presenting caller ID.
Use 182 Response for Call
waiting
Set the device to use 182 response code at call waiting response.
Anonymous Call Standard
Set the standard to be used for anonymous.
Dial without Registration
Set call out by proxy without registration.
Click To Talk
Set Click To Talk.
User Agent
The user agent is set by default
Response Single Codec
If setting enabled, the device will use single codec in response to an
incoming call request.
Ring Type
Set the ring tone type for the line.
Conference Type
Set the type of call conference, Local=set up call conference by the device
itself, maximum supports two remote parties, Server=set up call
conference by dialing to a conference room on the server.
Server Conference Number
Set the conference room number when conference type is set to be
Server.
Transfer Timeout
Set the timeout of call transfer process.
Enable Long Contact
Allow more parameters in contact field per RFC 3840.
Enable the Inactive Hold
Active capture package SDP is inactive, while the hold is sendrecv. Active
capture package has no response of 400, etc. Hold the hair inactive
After closing the grab packet, you can see that the DSP is sendonly and
the hold is sendrecv.
Use Quote in Display Name
Whether to add quote in display name.
Specific Server Type
Set the line to collaborate with specific server type.
Registration Expiration
Set the SIP expiration interval.
Use VPN
Set the line to use VPN restrict route.
Use STUN
Set the line to use STUN for NAT traversal.
Convert URI
Convert not digit and alphabet characters to %hh hex code.
DTMF Type
Set the DTMF sending mode; there are four types: