Planet FPS-1PW User Manual Download

Page: 17 / 87

Page 13

WPConfig

This program requires Windows 3.1, and the IPX/SPX protocol.

This program is on the CD-ROM, in the

Utilities\WPConfig

folder. Instructions for using the program are in a sub-folder of the

Manual

folder on the CD-ROM.

PSConfig

Menu-based DOS program, intended only to configure the Print Server
for use with NetWare V2, 3 and 4.

This program is on the CD-ROM, in the

Utilities\DOS

folder.

Instructions for using the program are in a sub-folder of the

Manual

folder on the CD-ROM.

Quickset

Command-line DOS program, intended only to configure the Print
Server for use with NetWare V2, 3 and 4. This program also has a
limited ability to configure the NetWare Server itself.

This program is on the CD-ROM, in the

Utilities\DOS

folder.

Instructions for using the program are in a sub-folder of the

Manual

folder on the CD-ROM.

Summary of Contents for FPS-1PW
























































































Search results

Summary of Contents for FPS-1PW

Reviews:

Related manuals for FPS-1PW

Brands by name

Popular brands

Planet FPS-1PW, User Manual

Search results

Summary of Contents for FPS-1PW

Reviews:

Related manuals for FPS-1PW

Brands by name

Popular brands