Planet FGSW-1820RS, User Manual

Page: 21 / 38

17
Device Features Allow user to disable or enable IGMP Snooping and
indicate the IP Multicast Router Port. Explained in
section 3.2.4.8.
Table 3-5 Descriptions of the Configuration screen Objects
3.2.4.1 Port
Press 1 on your keyboard to access the screen of Port from the Configuration screen
(please see the figure 3-9). This function allows user to setting each port of Switch, the
screen in figure 3-10 appears.
Figure 3-10 Port Configuration Screen
Please use I / M / J / L (Up / Down / Left / Right) key to move the highlight to the object
and press the “Space Bar” key to toggle back and forth between the options. After setup
completed, press “S” key to saving the current configuration. Then press “R” to restart
the Auto-negotiation to ensure the setting activated immediately. Table 3-6 describes the
Port objects.
Item Description
Enabled Allow disable or enable each port. If the port status is
disabled then this port will not receive or transmit any
packet. Default mode: enable.
Speed adver-tise-
ment Allow set the port link speed and duplex mode base on
auto-negotiation. Default mode: 100M Full (10/100Mbps
port); 1000M Full (Gigabit port).
Flow Control Allow disable or enable flow control.
Default mode: Enable.
Rx Bandwidth Per port packet transmission control (128K, 256K, 512K,
1M, 2M, 4M, 8M). Default mode: non-control.
Tx Bandwidth Per port packet transmission control (128K, 256K, 512K,
1M, 2M, 4M, 8M). Default mode: non-control.
Table 3-6 Descriptions of the Port screen Objects