The following table describes the parameters of this page:
Field
Description
System Time Set the system time manually.
NTP Configuration
State
Select enable or disable NTP function. You need to enable
NTP if you want to configure the parameters of NTP.
Server
Set the primary NTP server manually.
Server2
Set the secondary NTP server manually.
Time Zone
Choose the time zone in which area you are from the drop
down list.
3
In the
iag
ntains
Ping
,
A
an
3.8.1 Ping
Choose
Diagnostic
>
Ping
. The page shown in the following figure appears.
.8 Diagnostic
navigation bar, click
D
TM Loopback
,
ADSL
nostic
. The
Diagnostic
page that is displayed co
d
Diagnostic Test
.
The following table describes the parameter and button of this page:
Field
Description
Host
Enter the valid IP address or domain name.
PING
Click it to start to Ping.
3.8.2 ATM Loopback
Choose
Diagnostic
>
ATM Loopback
. The page shown in the following figure appears.
In this page, you can use VCC loopback function to check the connectivity of the VCC.
The ATM loopback test is useful for troubleshooting problems with the DSLAM and ATM
network.
57
