Planet ADE-3400v4 User Manual Download Page 39

Page: 39 / 68

3.5.1.2 DDNS

Click

DDNS

in the left pane, the page shown in the following figure appears. This page is

used to configure the dynamic DNS address from DynDNS.org or TZO. You can add or

remove to configure dynamic DNS.

The following table describes the parameters of this page:

Field

Description

DDNS provider

Choose the DDNS provider name.

Hostname

The DDNS identifier.

Interface

The WAN interface of the router.

Enable

Enable or disable DDNS function.

Username

The name provided b DDNS provider.

Password

The password provided by DDNS provider.

The email provided by DDNS provider.

Key

The key provided by DDNS provider.

3.5.2 Firewall

Choose

Service > Firewall

. The

Firewall

page that is displayed contains

IP Port Filter

MAC Filter

URL Blocking

Virtual Server

DMZ Setting

, and

DoS Setting

Summary of Contents for ADE-3400v4





































































Search results

Summary of Contents for ADE-3400v4

Reviews:

Related manuals for ADE-3400v4

Brands by name

Popular brands

Planet ADE-3400v4, User Manual

Search results

Summary of Contents for ADE-3400v4

Reviews:

Related manuals for ADE-3400v4

Brands by name

Popular brands